PETG vs PLA – which filament should you use?

Updated November 22, 2026

Key points
  • PLA is easier to print and better for detailed, decorative parts.
  • PETG is tougher and handles more heat, so it suits functional and outdoor parts.
  • Prusa’s material guide lists PLA at 185–235 °C nozzle / 50–60 °C bed and PETG at 215–270 °C / 70–90 °C.

PLA is the easiest filament to print and the best choice for detailed, decorative parts; PETG is tougher and more heat-resistant, which makes it better for functional parts. Prusa Research sums it up as “PLA for pretty things and PETG for functional things”. That rule works for most beginners.

Temperatures below come from Prusa’s material guide. Always start with the profile in your slicer for your exact filament brand.

At a glance

PLA PETG
Nozzle temperature 185–235 °C 215–270 °C
Bed temperature 50–60 °C 70–90 °C
Ease of printing Very easy Easy, with more stringing
Toughness Stiff, can be brittle Tough, flexes before breaking
Heat resistance Softens in a hot car Better than PLA
Bridges and overhangs Very good Usually worse than PLA
Typical uses Figures, models, prototypes, cosplay Brackets, clips, outdoor parts, mechanical parts

When to use PLA

Use PLA for anything you look at more than you load: figures, vases, display models, prototypes and props. It prints fast, needs little tuning, sticks well to most beds and gives crisp detail and good overhangs.

When to use PETG

Use PETG for parts that bend, take impacts, get warm or live outdoors: hooks, brackets, cable clips, planters and enclosures. Prusa uses PETG for many of its own printer parts.

Printing tips

  • Bed adhesion. PETG can stick too well to smooth PEI. Prusa’s guide suggests glue stick as a release layer on some sheets.
  • Stringing. PETG strings more. Use your slicer’s PETG profile, dry the filament, and adjust retraction only if needed.
  • Cooling. PLA likes strong part cooling; PETG prints better with less fan.
  • Enclosure. Neither needs one. Prusa notes that printing PLA or PETG inside a hot enclosure can hurt cooling.

Related

Sources

Questions and answers

Is PETG stronger than PLA?

PETG is tougher and less brittle, so it bends before it snaps and copes better with impacts. PLA is stiff but can crack. For clips, brackets and outdoor parts, PETG is usually the better choice.

Can I print PETG on a PLA printer?

Most printers with a heated bed and an all-metal or PTFE-lined hot end that reaches about 240 °C can print PETG. Prusa notes that, unlike PLA, PETG needs a heated bed.

Why does PETG string so much?

PETG is prone to stringing. Prusa suggests more retraction and a slightly lower nozzle temperature, but starting from your slicer’s PETG profile is the easiest fix.